Steel Roof Mount Anchor

The System Allfit 360° is a top fixed fall arrest anchor point designed for easy installation into a wide variety of steel roofs. The pre-drilled base plate provides for a quick installation while the swivelling AA406 ensures uniform loading to all sides. Special Features: – Heavy duty swivel eye bolt – Quick and easy installation – Suitable for both steel and timber structures – 2mm thickness version suitable for fall arrest only – 3mm thickness version suitable for abseil and fall arrest use Uses: 2mm version: Designed to support a fall arrest load of 15 KN in any direction (always in sheer) provided a suitable personal shock absorber is used. 3mm version: Designed for abseiling as well as to support a fall arrest load of 15 kN in any direction (always in sheer) provided a suitable personal shock absorber is used. Installation by trained and certified personnel in accordance with AS/NZS 4488.2:1997, AS/NZS 1891.4:2009, ISO 22846 (2003) and manufacturer’s instructions. Product Warranty: 10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations. Important Note: Failure to supply and/or install proprietary product in accordance with above standards and codes, specifications and instructions voids complete system certification and/or warranty Technical Data Material Used: Base plate: 2mm or 3mm grade 316 stainless steel Swivel AA406: Investment cast 316 Stainless Steel Finish: Base plate: 2B stainless steel (can be powder coated) Swivel AA406: Electro polish Ultimate load: Abseil 15kN Fall Arrest 15kN Dimensions: – Base plate – 282mm x 290mm – Eye Diameter – 25mm – Weight – 2mm plate – 1.635g 3mm plate – 2.290g Fixing Details: – Timber rafter/ batten – min 70mm x 35mm – Steel purlin – min gauge 150 x 1.2 mm – Roof Sheet – min gauge 0.42mm – LYSAGHT TOPSPAN® 40 top hat, 550MPa min yield Installation and Maintenance: Installation by trained and certified personnel in accordance with AS/NZS 4488.2:1997, AS/NZS 1891.4:2009, ISO 22846 (2003) and manufacturer’s instructions. Inspection and load testing required by competent person at intervals not exceeding 12 months as specified in AS 1891.4:2009, AS/NZS 4488.2:1997 and ISO 22846 (2003). Standards: Complies with WHS Act 2011 and relevant Codes of Practice. Australian Standard – AS/NZS 1891.4:2009, AS/NZS 4488.2:1997, ISO 22846 (2003) and AS/NZS 5532:2013.