Concrete Mount Abseil Anchor rated for Fall Arrest

Developed especially for loading in tension AA408 features a double bolt design. This safety factor is important in all applications where the anchor is loaded under an angle exceeding 20˚ with the surface it is installed into (as per AS/NZS 4488.2:1997, section 5.3). Special Features: – Designed to be loaded in sheer and tension – Large eye diameter – Safety factor of 2 bolts – 360 degree loading as well as tensile loading Uses: AA408 anchor is designed for industrial rope access (abseiling) and to support a fall arrest load of 15 KN provided a suitable personal shock absorber is used. It is essential in overhangs as a re-belay anchor or aid climbing anchor as well as a through bolt anchor with an added safety factor. Installation by trained and certified personnel in accordance with AS/NZS 4488.2:1997, AS/NZS 1891.4:2009, ISO 22846 (2003) and manufacturer’s instructions. Product Warranty: 10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations. Important Note: Failure to supply and/or install proprietary product in accordance with above standards and codes, specifications and instructions voids complete system certification and/or warranty

Technical Data Material Used: Investment Cast 316 Stainless Steel Finish: Bead blast or Electro polish Abseil capacity: 15 kN Fall arrest capacity: 15 kN Dimensions: – Overall length – 240 mm – Hole to hole centres – 200 mm – Eye Diameter – 25 mm – Weight – 710 g Fixing Details: – 2x Through bolt M12 (hole 14 DIA) – 2x Chemical HILTI HVU2 M12 or equivalent (hole 14 DIA) – 2x Chemical HILTI HVU2 M16 or equivalent (hole 18 DIA) – 2x Hilti HSL-GR M10 (hole15 DIA) – 2x Hilti HST3-R M12 125mm (hole M12 DIA) – 2x Friulsider FM-753 CRACK 120/20 M12 DIA Maintenance: Inspection and load testing required by competent person at intervals not exceeding 12 months as specified in AS 1891.4:2009, AS/NZS 4488.2:1997 and ISO 22846 (2003). Standards: Complies with WHS Act 2011 and relevant Codes of Practice. Australian Standard – AS/NZS 1891.4:2009, AS/NZS 4488.2:1997, ISO 22846 (2003) and AS/NZS 5532:2013.